A review of health monitoring techniques of induction Motor

##plugins.themes.academic_pro.article.sidebar##

Published Sep 2, 2014
Download
PDF
Statistic

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...
Volume 10, Issue 3, September 2014

##plugins.themes.academic_pro.article.main##

D. K. Chaturvedi
Professor, Department of Electrical Engineering, DEI Deemed University, Agra
Md. Sharif Iqbal
PhD Research Scholar, Department of Electrical Engineering, DEI Deemed University, Agra
Mayank Pratap Singh
PhD Research Scholar, Department of Electrical Engineering, DEI Deemed University, Agra
Vikas Pratap Singh
Senior Research Fellow, ERED, CPRI, Bangalore

Abstract

Induction motor is singly excited and brushless,very simple, compact and extremely rugged in construction and most reliable and low cost motor. Although, these motors are reliable but often exposed to hostile environments during its operation which leads to early deterioration leading to the motors failure. Faults and failures of induction machines can lead to excessive downtimes and generate large losses in terms of maintenance and revenues. This paper deals with the study of identification of different type of faults and the health monitoring techniques commonly used in induction motors.

##plugins.themes.academic_pro.article.details##

How to Cite
Chaturvedi, D. K., Sharif Iqbal, M., Pratap Singh, M., & Pratap Singh, V. (2014). A review of health monitoring techniques of induction Motor. Power Research - A Journal of CPRI, 487–498. Retrieved from https://node6473.myfcloud.com/~geosocin/CPRI/index.php/pr/article/view/791

References

  1. Aderiano M, Da Silva B S, (May 2006), “Induction Motor Fault Diagnostic And Monitoring Methods”, Milwaukee, Wisconsin, pp. 1 – 159.
  2. Akar Mehmet, AnkayaIlyas C, (2012), “Broken Rotor Bar Fault Detection In Inverter-Fed Squirrel Cage Induction Motors Using Stator Current Analysis And Fuzzy Logic”, Turk J Elec Eng & Comp Sci, Vol. 20, No. Sup. 1, pp. 1077 – 1089.
  3. Williamson S, Mirzoian K, (July 1985), “Analysis Of Cage Induction Motors With Stator Winding Faults”, Power Engineering Review, IEEE (Volume PER-5, Issue 7)., pp. 50 – 51.
  4. M artins Cunha C C, Filho B J C, (Oct 2006), “Detection Of Rotor Faults In Squirrel-Cage Induction Motors Using Adjustable Speed Drives”, Industry Applications Conference, 41st IAS Annual Meeting. Conference Record Of The 2006 IEEE (Volume:5)., pp. 2354 – 2359.
  5. Faiz Jawad, Ebrahimi Bashir Mahdi, Toliyat H A, Abu-Elhaija W S, (July 2010), “MixedFault Diagnosis In Induction Motors Considering Varying Load And Broken Bars Location”, Energy Conversion And Management, Volume 51, Issue 7, pp.1432 –1441.
  6. Nandi S, Ilamparithi T C, Sang Bin Lee, Doosoo Hyun, (May 2011), “Detection Of Eccentricity Faults In Induction Machines Based On Nameplate Parameters”, Industrial Electronics, IEEE Transactions On (Volume 58, Issue 5), pp. 1673 – 1683.
  7. Finley W R, Burke R R, (June1995), “Installation Of Motors For Trouble Free Operation”, Pulp And Paper Industry Technical Conference, IEEE.,Conference Record Of 1995 Annual., pp. 153 – 164.
  8. Pinjia Zhang, Bin Lu, Habetler T G, (April 2008), “Practical Implementation Of A Remote And Sensorless Stator ResistanceBased Thermal Protection Method”, Condition Monitoring And Diagnosis, CMD 2008. International Conference., pp. 159 – 162.
  9. Hua Su, Wang Xi, Kil To Chong, (Nov 2007), “Vibration Signal Analysis For Electrical Fault Detection Of Induction Machine Using Neural Networks”, Information Technology Convergence, IEEE. ISITC 2007. International Symposium., pp. 188 – 192.
  10. Thomas V V, Vasudevan K, Kumar V J, (Jun 2002), “Implementation Of Online Air-Gap Torque Monitor For Detection Of Squirrel Cage Rotor Faults Using TMS320C31”, Power Electronics, Machines And Drives, IEE, International Conference On (Conf. Publ. No. 487)., pp. 128 – 132.
  11. B enbouzid M E H, Vieira M, Theys C, (Jan 1999), “Induction Motors’ Faults Detection And Localization Using Stator Current Advanced Signal Processing Techniques“, Power Electronics, IEEE Transactions On (Volume 14, Issue 1)., pp. 14 – 22.
  12. ÖnelIzzet Y, Dalci K Burak Senol İbrahim, (2006), “Detection Of Bearing Defects In Three-Phase Induction Motors Using Park’s Transform And Radial Basis Function Neural Networks”, Sadhana, Volume 31, Issue 3, pp. 235 – 244.
  13. M irafzal B, Demerdash N A O, (MarchApril 2004), “Induction Machine BrokenBar Fault Diagnosis Using The Rotor Magnetic Field Space-Vector Orientation”, Industry Applications, IEEE Transactions On (Volume 40, Issue 2)., pp. 534 – 542.
  14. O hyama K, Asher G M, Sumner M, (Feb 2006), “Comparative Analysis Of Experimental Performance And Stability Of Sensorless Induction Motor Drives”, Industrial Electronics, IEEE Transactions On (Volume 53, Issue 1)., pp. 178 – 186.
  15. B enbouzid M E H, Vieira M, Theys C, (Jan 1999), “Induction Motors’ Faults Detection And Localization Using Stator Current Advanced Signal Processing Techniques“, Power Electronics, IEEE Transactions On (Volume 14, Issue 1)., pp. 14 – 22.
  16. L iu Yukun, GuoLiwei, Wang Qixiang, An Guoqing, Guo Ming, LianHao, (Nov 2010), “Application To Induction Motor Faults Diagnosis Of The Amplitude Recovery Method Combined With FFT”, Mechanical Systems And Signal Processing, Volume 24, Issue 8, pp. 2961–2971.
  17. Riera-Guasp M, Pineda-Sanchez M, Perez-Cruz J, Puche-Panadero R, RogerFolch J, Antonino-Daviu J A, (June 2012), “Diagnosis Of Induction Motor Faults Via Gabor Analysis Of The Current In Transient Regime”Instrumentation And Measurement, IEEE Transactions On (Volume 61, Issue 6), pp. 1583 – 1596.
  18. Ning Ma, Jianxin Wang, (Jan 2011), “An Adaptive Method OfParameters Selection For SPWVD”,Measuring Technology And Mechatronics Automation (ICMTMA), Third International Conference, pp. 363 – 366
  19. U ddin M N, HaoWen, (July-Aug 2007), “Development Of A Self-Tuned NeuroFuzzy Controller For Induction Motor Drives”, Industry Applications, IEEE Transactions On (Volume 43, Issue 4)., pp. 1108 – 1116.
  20. M ahamad A K, Hiyama T, (June 2010), “Fault Classification Performance of Induction Motor Bearing Using AI Methods”, Industrial Electronics AndApplications (ICIEA), The 5th IEEE Conference., pp. 56 – 61
  21. Ibrahim M M, Nekad H J, (May 2013), “Broken Bar Fault Detection Based On The Discrete Wavelet Transform And Artificial Neural Network”, Asian Transactions On Engineering (ATE ISSN: 2221-4267) Volume 03, Issue 02, pp. 1 – 6
  22. Dash R N, Subudhi B, Das S, (2010), “Induction Motor Stator Inter-Turn Fault Detection Using Wavelet Transform Technique”, Industrial And Information Systems (ICIIS), IEEE International Conference, pp. 436 – 441.
  23. Ellison A J Yang S J, (Jan 1971), “Effects Of Rotor Eccentricity On Acoustic Noise From Induction Machines”, Electrical Engineers, IEE Proceedings Of The Institution Of (Volume 118, Issue 1)., pp. 174 – 184.
  24. Refaat S S, Abu-Rub H, Saad M S, AboulZahab E. M., Iqbal A., (Feb 2013), “ANNBased For Detection, Diagnosis The Bearing Fault For Three Phase Induction Motors Using Current Signal”,Industrial Technology (ICIT), IEEE International Conference On, pp.253 – 258..
  25. Askari M R, Kazemi M,(Aug-Sept 2010), “Using Wavelet Theory For Detection Of Broken Bars In Squirrel Cage Induction Motors”, Universities Power Engineering Conference (UPEC), 45th International., pp. 1 – 6.
  26. Abitha M W, Rajini V, (Feb 2013), “Park’s vector approach for online fault diagnosis of induction motor”, Information Communication and Embedded Systems (ICICES), IEEE International Conference, pp. 1123 – 1129.
  27. ArabacıHayri, Bilgin Osman, (July 2010). “Automatic detection and classification of rotor cage faults in squirrel cage induction motor”, Neural Computing and Applications, Volume 19, Issue 5, pp. 713 – 723.
  28. B agheri F, Khaloozaded H, Abbaszadeh K, (June 2007), “Stator fault detection in induction machines by parameter estimation, using adaptive kalman filter”,Control & Automation, IEEE MED ‘07. Mediterranean Conference, pp.1 – 6.
  29. B allal Makarand S, Suryawanshi Hiralal M, Mishra Mahesh K, (April 2008), “Detection of Incipient Faults in Induction Motors using FIS, ANN and ANFIS Techniques”, Journal of Power Electronics, Vol. 8, No. 2, pp. 181-191.
  30. B ayindir R, Sefa I, Colak I , Bektas A, (Sept 2008), “Fault Detection and Protection of Induction Motors Using Sensors”, Energy Conversion, IEEE Transactions on (Volume:23 , Issue: 3)., pp. 734 – 741.
  31. Cardoso A J M, Cruz S M A, Fonseca D S, (Sept 1999), “Inter-turn stator winding fault diagnosis in three-phase induction motors, by Park’s vector approach”, Energy Conversion, IEEE Transactions on (Volume 14, Issue 3)., pp. 595 – 598.
  32. Concari C, Franceschini G, Tassoni C, Toscani A, (Sept 2013), “Validation of a Faulted Rotor Induction Machine Model With an Insightful Geometrical Interpretation of Physical Quantities”, Industrial Electronics, IEEE Transactions on (Volume60, Issue 9)., pp. 4074 – 4083.
  33. Eren, L, Devaney, M J, (April 2004), “Bearing damage detection via wavelet packet decomposition of the stator current”, Instrumentation and Measurement, IEEE Transactions on (Volume 53, Issue 2)., pp. 431 – 436.
  34. Hew Wooi Ping, Gaeid K S, (Oct 2012), “Detection of induction motor faults using direct wavelet transform technique”, Electrical Machines and Systems (ICEMS), IEEE 15th International Conference, pp. 1 – 5.
  35. Hsu J S, (Sept-Oct 1995), “Monitoring of defects in induction motors through air-gap torque observation”, Industry Applications, IEEE Transactions on (Volume 31, Issue 5)., pp. 1016 – 1021.
  36. Jaehoon Kim, Inseok Yang, Donggil Kim, Hamadache M., Dongik Lee., (Oct 2012), “Bearing fault effect on induction motor stator current modeling based on torque variations”, Control, Automation and Systems (ICCAS), 2012 12th International Conference., pp. 814 – 818.
  37. Kechida Ridha, Menacer Arezki, Talhaoui Hicham, (June 2013), “Approach Signal for Rotor Fault Detection in Induction Motors”, Journal of Failure Analysis and Prevention, Volume 13, Issue 3, pp. 346 – 352.

Most read articles by the same author(s)

1 2 > >>