A Case Study of High Temperature Reheater Boiler Tube Failure

##plugins.themes.academic_pro.article.main##

Arvind Kumar

Abstract

Several investigations on the failure of boiler tubes of thermal power plant have been carried out. This paper presents the failure analysis of a reheater tube of 210 MW thermal power plant. The reheater tube got damaged after service exposure a life of 1,65,900 hrs. The failed tube has a slit type opening with minor circumferential expansion at the rupture section. Scale was observed on the inside and outside surface of the tube. The scale formed on the outside and in-side surface of the tube was analysed through EDX and XRD to know the constituents of the scale and in evaluating the cause of failure of the tube. The tube was observed through its cross-sectional for the wall thinning. The area around the failed reheater tube sample was prepared and studied for structural degradation; hardness mapping was also carried out on the tube to find the cause of failure.

##plugins.themes.academic_pro.article.details##

How to Cite
Kumar, A. (2015). A Case Study of High Temperature Reheater Boiler Tube Failure. Power Research - A Journal of CPRI, 199–206. Retrieved from https://node6473.myfcloud.com/~geosocin/CPRI/index.php/pr/article/view/760

References

  1. D N French Fossil fuel fired boiler, John wiley and sons Inc, Newyork, 2nd edition, 1993.
  2. Dinesh Gond, Vikas Chawla, D Puri, S Prakash. Oxidation studies of T-91 & T-22 boiler steel in air at 9000C, Journal of minerals and material characterization & engineering. Vol.9, No.8, pp. 749-761, 2010.
  3. W Song, L Tang, X Zhu, Y Rong, Z Zhu and S Koyama, Fusibility and flow properties of coal ash and slag, Fuel, Vol. 88, No. 2, pp. 297-304, 2009.
  4. H Bilirgen Slagging in PC boilers and developing mitigation strategies, Fuel, Vol. 115, pp. 618-624, 2014.
  5. M Azad Sohail, Aismail Mustafa, A study on damage in alloy superheater tubes of a thermal power plant, Indian journal of Engineering & material science, Vol. 14, pp. 19-23, Feb 2007.
  6. R Viswanath, Damage mechanism and life assessment of high temperature component, ASM international, Metal Park, Ohio 1989.
  7. R Viswanathan et.al, Life assessment of super heater/reheater tubes in fossil boiler, Journal of pressure vessel technology, Vol.1, pp. 1-16, Feb-94.
  8. I M Rehr and W Apblett, Corrosion problem in coal fired fossil boiler super heater and reheater tubes report CS-1811, Electric Power Research Institute, Palo Alto Ca (1981).
  9. ASM metal handbook, Failure analysis and prevention, Vol.11, Ohio, Metal Park, ASM International 2002.
  10. B R Cardoso, F W Comeli, R M de Santa, H C Furtado, M B Lisboa & L H de Almeida, Microstructural Degradation of boiler tubes due to the presence of internal oxide layer, Journal of material research and technology, 1(2) pp. 109-116, 2012.
  11. Henry George Simns, Oxidation behaviour of austenitic stainless steel at high temperature in super critical plant, Master of research thesis, The University of Birmingham, April 2011.
  12. Yang Y, Chen Y, Sridharan K, K Allen TR, Evolution of carbide precipitation in 2.25Cr-1Mo steel during long term service in a power plant. Metallurgical and material transactions A 2010; 41(6):1441-7.
  13. D R H Jones, Creep failure of overheated boiler super heater and reheater tubes, Engineering failure analysis anal., Vol.11, pp. 873-893, year 2004.