Grid Integrated Photovoltaic System with Active And Reactive Power Control Using Fuzzy Based Controller

##plugins.themes.academic_pro.article.main##

Nilesh Shah
R. Chudamani

Abstract

Photovoltaic (PV) panels are costlier and have poor efficiency in energy conversion. Therefore, it is essential to utilize a PV based system effectively. The characteristics of PV cell are very much nonlinear that show only one point corresponding to maximum power on P-V curve when the insolation is uniform. But in partial shading situations, the P-V curve shows many peaks among which only one point corresponds to the maximum power. In this paper, grid interactive PV system is proposed with active as well as reactive power control capability even under partial shading conditions using a novel global peak power point tracking algorithm based on fuzzy logic. The proposed PV system delivers active as well as reactive power in presence of sunlight. In the absence of sunlight and under low insolation, the inverter of the PV system provides compensation of load reactive power otherwise inverter remains unutilized. This improves the utility of PV system and thus enhances the efficiency of the system. The proposed system is simulated for different partial shading and changing load conditions using MATLAB/SIMULINKTM. The simulation outcomes authenticate the performance and effectiveness of the proposed system for active and reactive power flow control with the proposed control approach.

##plugins.themes.academic_pro.article.details##

How to Cite
Shah, N., & Chudamani, R. (2015). Grid Integrated Photovoltaic System with Active And Reactive Power Control Using Fuzzy Based Controller. Power Research - A Journal of CPRI, 111–124. Retrieved from https://node6473.myfcloud.com/~geosocin/CPRI/index.php/pr/article/view/750

References

  1. G Tsengenes and G Adamidis, “Investigation of the behaviour of a three-phase gridconnected photovoltaic system to controlactive and reactive power”, Journal on Electrical Power Systems Research (Elsevier), Vol. 81, pp. 177-184, 2011.
  2. Wu Libo, Zhao Zhengming, Liu Jianzheng, “A single stage three-phase grid connected photovoltaic system with modified MPPT method and reactive power compensation”, IEEE trans. Energy Conversion, Vol. 22, No. 4, pp. 881-886, 2007.
  3. H Yu, J Pan and A Xiang, “A multi-function grid-connected PV system with reactive power compensation for the grid”, Solar Energy, Vol. 79, pp. 101-106, 2005.
  4. Seo Hyo-Ryong, Jang Seong-Jae, Kim Gyeong-Hun, Park Minwon and Yu InKeun, “Hardware based performance analysis of a multi-function single-phase PV-AF”, Energy Conversion congress and Exposition, pp. 2213-2217, 2009.
  5. M F Schonardie and D C Martins, “Threephase grid-connected photovoltaic system with active and reactive power control using dq0 transformation”, Proceedings of Power Electronics Specialists Conference (PESC), pp. 1202-1207, 2008.
  6. N Shah and R Chudamani, “Single-stage Grid intercative PV system using novel fuzzy logic based MPPT with active and reactive power control”, 7th IEEE International conf.on Industrial Electronics and Applications (ICIEA2012), pp. 1664-1669, 2012.
  7. N Shah and R Chudamani, “Grid Interactive PV System with Harmonic and Reactive Power Compensation Features using a Novel Fuzzy Logic Based MPPT”, 7th International conf. on Industrial and Information Systems (ICIIS2012), chennai, 2012.
  8. Zue A O, Chandra A, “Grid Connected Photovoltaic Interface with VAR Compensation and Active Filtering Functions”, International Conf. on Power Electronics, Drives and Energy Systems, PEDES’06, 2006.
  9. T Esram and P Chapman, “Comparision of photovoltaic array maximum power point tracking techniques”, IEEE Trans. on Energy Conversion, Vol. 22, No.2, pp. 439449, 2007.
  10. S Jain and V Agarwal, “Comparison of the performance of maximum power point tracking schemes applied to single-stage grid-connected photovoltaic systems”, IET Electr. Power Appl., Vol. 1, No. 5, pp. 753762, 2007.
  11. K Kobayashi, I Takano, and Y Sawada, "A study on a two stage maximum power point tracking control of a photovoltaic system under partially shaded insolation conditions", IEEE Power Engineering Society General Meeting, Vol. 4, pp. 26122617, 2003.
  12. T Noguchi, S Togashi, and R Nakamoto, "Short-current pulse-based maximumpowerpoint tracking method for multiple photovoltaic-and-converter module system",IEEE Trans, on Industrial Electronics, Vol. 49, No. 1, pp. 217-223, 2002.
  13. S Kazmi, H Goto, O Ichinokura, and G HaiJiao, "An improved and very efficient MPPT controller for PV systems subjected to rapidly varying atmospheric conditions and partial shading", Australasian Universities Power Engineering Conference (AUPEC), pp. 1-6, 2009.
  14. Y H Ji, D Y Jung, J G Kim, J H kim, T W Lee, and C Y Won, “A real maximum power point tracking method for mismatching compensation in PV array under partially shaded conditions”, IEEE Trans. on Power Elect., Vol. 26, No. 4, pp. 1001-1009, 2011.
  15. H Patel and V Agarwal, "Maximum power point tracking scheme for PV systems operating under partially shaded conditions", IEEE Trans. on Industrial Electronics, Vol. 55, No. 4, pp. 1689-1698, 2008.
  16. Y Liu, "Advance control of photovoltaic converters," Ph.D. thesis, University of Leicester, UK, 2009.
  17. K Ishaque, Z Salam, M Amjad, S Mekhilef, “An improved particle swarm optimization (PSO) based MPPT for PV with reduced steady state oscillation”, IEEE Trans. on Power Electronics, Vol. 27, No. 8, pp. 3627 – 3638, 2012.
  18. M Miyatake, M Veerachary, F Toriumi, N Fujii, and H Ko,"Maximum power point tracking of multiple photovoltaic arrays: A PSO approach", IEEE Trans. on Aerospace and Electronic Systems, Vol. 47, No. 1, pp.367-380, 2011.
  19. B Alajmi, K Ahmed, S Finney, and B Williams, “A maximum power point tracking technique for partially shaded photovoltaic systems in microgrids”, IEEE Trans. on Industrial Electronics, Vol. 60, No. 4, pp.1596-1606, 2013.
  20. Zainal Salam, Jubaer Ahmed, Benny S Merugu, “The application of soft computing methods for MPPT of PV system: A technological and status review”, Journal on Applied Energy (Elsevier), Vol. 107, pp.
  21. -148, 2013.
  22. A Bidram, A Davoudi and R Balog, “Control and circuit techniques to mitigate partial shading effects in photovoltaic arrays”, IEEE J. Photovolt., Vol. 2, No.4, pp. 532546, 2012.
  23. N Shah and R Chudamani, “A novel algorithm for global peak power point tracking in partially shaded grid-connected PV system”, Proc. Int. Conf. IEEE Power and Energy Conference (PECon), Kota kinabalu, Sabah, Malasiya, pp. 558-563, 2012.
  24. H Patel and V Agarwal, "MATLAB-based modeling to study the effects of partial shading on PV array characteristics", IEEE Trans. onEnergy Conversion, Vol. 23, No.1, pp. 302-310, 2008.
  25. Chetan Singh Solanki, “Solar Photovoltaics: Fundamentals, Technologies and Applications”, PHI Learning Private Limited, 2nd ed., New Delhi, 2009.
  26. Walker G, “Evaluating MPPT converter topologies using a Matlab PV model”, Journal of electrical and electronics engineering, Australia, Vol. 21, pp. 49–56, 2001.
  27. Timothy J Ross, “Fuzzy logic with engineering applications”, Mcgraw-Hill International Edition, 1997.
  28. H Akagi, Y Kanazawa and A Nabae, “Instantaneous reactive power compensators comprising switching devices without energy storage components”, IEEE Trans. on Industry Application, Vol. IA-20, No. 3, pp. 625-630, 1984.
  29. A M Al-Zamil, D A Torrey,“A Passive Series, Active Shunt Filter for High Power Applications”, IEEE Trans. on Power Electronics, Vol. 16, No. 1, pp. 101-109, 2001.