Investigation of Mechanical Properties and wear behavior of Ni-alloyed Specially Heat Treated Permanent Moulded Austempered Ductile Iron (PMADI) for Power Plant Applications
##plugins.themes.academic_pro.article.main##
Abstract
##plugins.themes.academic_pro.article.details##
References
- Roedter H. “Powerful Ductile Iron castings for power plants and wind energy applications”, Sorelmetal Technical Serivices.
- Uma T R, Simha J B,Narasimha Murthy K. “Infl uence of nickel on mechanical and slurry erosive wear behaviour of permanent moulded toughened austempered ductile iron.” Wear, No. 271, pp. 1378–1384.
- Martinez R, Boeri R and Sikora J. “Impact and fracture properties of ADI, comparison with 4140 steel”, American Foundrymens Society Congress, Vol. 98, No. 008, 1998.
- Seetharamu S, Sampathkumaran P, Kumar R K, Narasimha Murthy K and Martin Jebraj P. “Abrasion and erosion resistance of permanent moulded austempered ductile iron”, Wear, No. 167, 1–8, 1993.
- Narasimha Murthy K, Sampathkumaran P and Seetharamu S. “Abrasion and erosion behaviour of manganese alloyed permanent moulded austempered ductile iron”, Wear, No. 267, pp. 1393–1398, 2009.
- Putatunda S. “Development of austempered ductile iron with simultaneous high yield strength and fracture toughness by a novel novel two-step austempering process.” Mater Sci Eng., No. 315, pp. 70–80, 2001.
- Ayman H Elsayed, Megahed M M, Sadek A A and Abouelela K M. “Fracture toughness characterization of ADI produced using both conventional and two-step austempering process”, Materials and Design, No. 30, pp. 1866–1877, 2009.
- Francucci G, Sikora J and Dommarco R. “Abrasion resistance of ductile iron austempered by the two-step process”, Materials Science and Engineering, No. 485, pp. 46–54, 2008.
- Dodd G and Cast Metals Development Ltd. “Austempered ductile iron castingsadvantages, productions, properties and specifications”, Materials and Design, Vol. 13, 1992.
- Gagne M. “The infl uence of Manganese and Silicon on the microstructure and tensile properties of austempered ductile iron”, Trans. A.F.S. No. 93, pp. 108, 1985.
- Nili A M, Ghasemi H M, Osia M. ‘Wear’, No. 231, pp. 293–300, 1999.
- Erica O, Sidjaninb L, Miskovica Z, Zeca S and Jovanovica M T. “Microstructure and toughness of CuNiMo austempereductile iron”, Materials Letters, Vol. 58, pp. 2707– 2711, 2004.
- Kovacs B V. Mod. Cast., Vol. 36, pp. 38–41, 1990.
- Yang J and Susil K Putatunda. “Infl uence of novel two-step austempering process on the strain hardening behaviour of ADI”, Department of Chemical Engineering and Material Science, Detroit, 2004.
- Kim Y J, Shin H, Park H and Lim J D. “Investigation into mechanical properties of austempered ductile iron (ADI) in accordance with austempering temperature”, Materials Letters, Vol. 62, pp. 357–360, 2008.