Transients Instability Detection and Prevention Control Schemes

##plugins.themes.academic_pro.article.sidebar##

Published Dec 20, 2013
Download
PDF
Statistic

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...
Volume 9, Issue 4, December 2013

##plugins.themes.academic_pro.article.main##

S. Parvathi
Power Systems Lab, Electrical Dept., IIT Madras, Chennai 600036
K. Shanti Swarup
Power Systems Lab, Electrical Dept., IIT Madras, Chennai 600036

Abstract

Effective real time monitoring and analysis of power system has become very important from the point of view of power system stability and security. Recent research in literature has identified that it is possible to determine the critical group of generators and hence predict the generators going out of synchronism. However, a clear mitigation scheme from a wide area perspective has not yet been identified. The main contribution of this paper deals with the post prediction of instability phase. After the identification of the critical generator or group of generators, effective actions such as load shedding should be initiated. The work targets in finding the optimal location where load is to be shed using the rotor angle algorithm and the Jacobian based distribution factor sensitivity

##plugins.themes.academic_pro.article.details##

How to Cite
Parvathi, S., & Shanti Swarup, K. (2013). Transients Instability Detection and Prevention Control Schemes. Power Research - A Journal of CPRI, 9(4), 469–476. Retrieved from https://node6473.myfcloud.com/~geosocin/CPRI/index.php/pr/article/view/853

References

  1. X. Liu, Y. Li, Z. Liu, Z. Huang, Y. Miao, Q. Jun, Q. Jiang, and W. Chen, “A novel fast transient stability prediction method based on pmu,” in Power & Energy Society General Meeting, 2009. PES’09. IEEE. IEEE, 2009, pp. 1–5.
  2. C. Liu and J. Thorp, “New methods for computing power system dynamic response for real-time transient stability prediction,” Circuits and Systems I: Fundamental Theory and Applications, IEEE Transactions on, vol. 47, no. 3, pp. 324–337, 2000.
  3. M. Haque and A. Rahim, “Determination of first swing stability limit of multimachine power systems through taylor series expansions,” Generation, Transmission and Distribu¬tion [see also IEE ProceedingsGeneration, Transmission and Distribution], IEE Proceed¬ings, vol. 136, no. 6, pp. 373– 380, 1989.
  4. F. Song, T. Bi, and Q. Yang, “Perturbed trajectory prediction method based on wide area measurement systems,” Automation of Electric Power Systems, vol. 30, no. 23, pp. 27–31, 2006.
  5. Q. Guo, X. Liu, S. L¨u, and D. XIA, “Application of gps synchronized clock to power system transient stability predict and control,” Automation of Electric Power Systems, vol. 22, no. 6, pp. 11–13, 1998.
  6. M. Takahashi, K. Matsuzawa, M. Sato, K. Omata, R. Tsukui, T. Nakamura, and S. Mizuguchi, “Fast generation shedding equipment based on the observation of swings of generators,” Power Systems, IEEE Transactions on, vol. 3, no. 2, pp. 439–446, 1988
  7. M. S. V. M. V. Venkataramana Ajjarapu, Bruno Leonardi, “Real-time security assessmentof angle stability using synchrophasors,” Tech. Rep., also available as http://www.pserc.wisc. edu/research/ public reports/Mani Ajjarapu Synchrophasor S-31 2010.pdf.
  8. Y . Gong, N. Schulz, and A. Guzman, “Synchrophasor-based real-time voltage stability index,” in Power Systems Conference and Exposition, 2006. PSCE’06. 2006 IEEE PES. IEEE, 2006, pp. 1029– 1036.
  9. K. Men, P. Xu, J. Zhao, X. Wu, and C. Hong, “Comparison of methods for the perturbed trajectory prediction based on wide area measurements,” in Power Engineering and Automation Conference (PEAM), 2011 IEEE, vol. 3. IEEE, 2011, pp. 321–325.
  10. M. Sherwood, D. Hu, and V. Venkata subramanian, “Real-time detection of angle instability using synchrophasors and action principle,” in Bulk Power System Dynamics and Control- VII. Revitalizing Operational Reliability, 2007 iREP Symposium. IEEE, 2007, pp. 1–11
  11. C. Liu, M. Su, S. Tsay, and Y. Wang, “Application of a novel fuzzy neural network to real-time transient stability swings prediction based on synchronized phasor measurements,” Power Systems, IEEE Transactions on, vol. 14, no. 2, pp. 685–692, 1999.
  12. M.-C. Su, C.-W. Liu, and S.-S. Tsay, “Neural-network-based fuzzy model and its applica¬tion to transient stability prediction in power systems,” Systems, Man, and Cybernetics, Part C: Applications and Reviews, IEEE Transactions on, vol. 29, no. 1, pp. 149 –157, feb 1999.
  13. X. Chu and Y. Liu, “On-line learning applied to power system transient stability predic¬tion,” in Circuits and Systems, 2005. ISCAS 2005. IEEE International Symposium on. IEEE, 2005, pp. 3906–3909.
  14. L. Yu-tian and L. Fei, “ A p p l i c a t i o n of pmu and fuzzy radial basis function network to power system transient stability prediction,” PROCEEDINGSCHINESE SOCIETY OF ELECTRICAL ENGINEERING, vol. 20, no. 2, pp. 19–23, 2000.
  15. X. LIU, Q. JIANG, and Y. CAO, “A novel fast transient stability prediction method based on perturbed trajectories fitting of rotor angle,” Automation of Electric Power Systems, vol. 32, no. 19, pp. 5–9, 2008.
  16. Chen, Shiuan-Tai, et al. “Power System Fast Line Flow Calculation for Security Control by Sensitivity Factor.” Innovative Computing, Information and Control, 2007. ICICIC’07. Second International Conference on. IEEE, 2007.

Most read articles by the same author(s)